Filter
Top Products
101
Learning the Basics
Powering down the computer
❖ Click All to apply the settings whenever when you are using
battery power or outlet power.
6 Click OK,
7 Click OK again, then close the Control Panel.
NOTE: For more information about the Power Saver utility,
see “Toshiba Power Saver utility” on page 176.
Starting again after Shut down
To start the computer up again, press the power button until the on/
off light changes to green.
If you shut down the computer by closing the display panel, you
can start it again by opening the display panel.
Using Hibernation
Hibernation mode shuts the computer down completely, but it first
saves the current mode of the computer to the hard disk. Since
Hibernation mode does not require power to maintain the saved
information, the system settings are retained indefinitely.
Restoring information from the hard disk takes longer than
restoring it from memory. When you start up again, the computer
runs a self-test, loads the operating system, and then returns to the
mode in which you left it.
Factors to consider when choosing Hibernation:
❖ While in Hibernation mode, the computer uses no battery
power
❖ Because the mode of the system is held on the hard disk, no
data is lost if the main battery discharges
❖ When starting up again, Hibernation uses less time and
battery power than does Turn off computer