Filter
Top Products
66
Getting Started
Using external display devices
If you’re connecting an SVGA monitor, skip to “Connecting an
external monitor or projector” on page 67.
Selecting video cables
To connect a device to the video-out port, you’ll need to purchase
a composite video cable. For the best video quality, always use a
properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Using a poor quality cable may result in a dull or fuzzy picture,
poor color, ghosting, video noise, or loss of video.
Connecting to the video-out port
NOTE: Video cables are not included with your computer. To
connect a device to the video-out port, you’ll need to
purchase a composite video cable.
To connect the device:
1 Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its video-in port.
2 Connect the other end of the video cable to the video-out port
on the left side of the computer.
3 Turn on the external video device.
4 Set the display mode by pressing
Fn + F5, or by setting the
Display Properties settings. For more information, see