Filter
Top Products
116
Mobile Computing
Changing batteries
7 Pull the discharged battery pack out of the computer.
Removing the discharged battery
WARNING: If the battery is leaking or its case is cracked, put
on protective gloves to handle it, and discard it immediately
following the advice in “Disposing of used batteries” on
page 117.
8 Wipe the terminals of the charged battery with a clean cloth to
ensure a good connection.
9 Insert the charged battery into the slot until the latch clicks.
The battery pack has been designed so that you cannot install
it with reverse polarity.
CAUTION: If the battery does not slide into the slot easily,
move the battery release lock to the unlocked position and
try again. Do not force the battery into position.
10 Reset the battery lock to the locked position.
11 Turn the computer right side up.
12 Reconnect any cables.
13 Restart the computer.