Filter
Top Products
Chapter 1 PREPARATIONS
14
Front / Right side
9
10
7
8
6
2
1
3
4
5
11
12
1. Reversing automatic document feeder
The stack of originals is scanned one sheet at a time. Both
sides of the original can be scanned. A maximum of 100
originals (80 g/m
2
or 20 lb. Bond) (or stack height 16 mm
or 0.62”) can be placed in one go. (The maximum number
of sheets that can be set may vary depending on the
media type of the originals.)
2. Operator’s manual pocket (back)
Keep the manual in this pocket.
3. Bypass tray
Use this to perform printing on special media types such
as OHP lm, etc.
4. Bypass cover
Open it when a paper jam occurs.
5. Paper feed cover
Open this cover when releasing paper misfed in the
drawer feeding area.
6. Paper size indicator
7. Drawer
A maximum of 550 sheets (64 g/m
2
or 17 lb. Bond) or 500
sheets (80 g/m
2
or 20 lb. Bond) of plain paper can be
placed in one go.
8. Tandem large capacity feeder
A maximum of 3000 sheets (64 g/m
2
, 17 lb. Bond) or 2500
sheets (80 g/m
2
, 20 lb. Bond) of plain paper can be placed
in one go.
9. Front cover
Open it when a paper jam occurs in the transfer/transport
unit.
10. Toner cover
Open this cover when replacing the toner cartridge.
11. Network interface connector
Use this connector when connecting this equipment to a
network.
12. USB terminal (4-pin)
Use this terminal when connecting this equipment to a PC
with a commercially available USB cable.
Description of Each Component
This section describes the names and operations of the components and options.