Toshiba 655 All in One Printer User Manual


 
1
2
3
4
5
Description of Each Component
21
Clearing functions selected
When you press the selected button, the function which has been selected is cleared. Or the selected setting is cleared
automatically by the automatic function clear* when the equipment has been left inactive for a specied period of time.
* Automatic function clear:
This function works when a specied period of time has passed since the last paper exit or the last entry of any button. This function returns all the
function settings to default without the need to press the [FUNCTION CLEAR] button. When the department or user management function is being used,
the display returns to the department code or user information input menu. When these functions are not being used, the display returns to the basic
menu of the copying function.
The period for the automatic function clear is set at 45 seconds by default at the time of installation of the equipment.
Refer to the MFP Management Guide for change of this setting.
Adjusting the contrast of the touch panel
You can set the contrast of the touch panel in the USER FUNCTIONS menu entered by pressing the [USER FUNCTIONS]
button on the control panel. For details, refer to the MFP Management Guide.