Filter
Top Products
Figure 3-3 Connecting the AC adaptor 1
2-pin
3-pin
2. Plug the power connector of the power cable into the docking interface
on your tablet.
Figure 3-4 Connecting the AC adaptor 2
3. Plug the AC adaptor into a live wall outlet.
You can charge the tablet by connecting the power cable to a USB port on
a computer. TOSHIBA recommends charging when the tablet goes into
sleep mode.
Turning on the power
This section describes how to power up your tablet.
Press and hold Power button to turn on the tablet. The tablet will vibrate to
indicate the status.
Figure 3-5 Turn on the tablet
TOSHIBA AT200
User's Manual 3-9