Filter
Top Products
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
1. Choose your preferred language and tap Start to continue.
2. Connect to a wireless network via Wi-Fi.
You can choose to skip and turn Wi-Fi on later in Settings screen.
3.
Choose whether to use Google Location Service™ and tap Next to
continue.
4. Set date and time or use network-provided time and tap Next to
continue.
5. Register or sign in with a Google™ account. You can also skip this
step by tapping Skip.
The last step will be automatically skipped if you choose to skip Wi-Fi
connection.
Turning off the power
If you are not going to use your tablet for a long time, shut it down. You can
also turn the LCD off in order to extend battery life.
Shut down the tablet
When you shut down the tablet, no data will be saved. The tablet will boot
to the operating system's main screen the next time it is turned on.
1. If you have entered data, either save it to flash memory or to other
storage media.
Never turn off the power while an application is running. Doing so
could cause loss of data.
Never turn off the power, disconnect an external storage tablet or
remove storage media during data read/write. Doing so can cause
data loss.
2. Turn off or remove any peripheral devices connected to the tablet.
3. Press and hold Power button for 2 seconds and select OK to turn off
the tablet.
In any emergency case, you can also press and hold Power button for
about six seconds to force power off.
Do not turn the tablet back on immediately - wait a short period to
avoid any potential damage.
TOSHIBA AT200
User's Manual 3-10