Filter
Top Products
The battery is nearly completely discharged. In this instance you
should leave the AC adaptor connected for a few minutes and the
battery should begin charging.
The indicator may show a rapid decrease in battery operating time when
you try to charge a battery under the following conditions:
The battery has not been used for a long time.
The battery has completely discharged and been left unattended for a
long time.
In such cases you should follow the steps as detailed below:
1. Fully discharge the battery with the power on until the system
automatically turns itself off.
2. Connect the AC adaptor to the docking interface of the tablet, and to a
wall outlet that is supplying power.
3. Charge the battery until the multi function LED indicator (when it is set
as Power/battery indicator) is off.
Repeat these steps two or three times until the battery recovers normal
capacity.
TOSHIBA AT200
User's Manual 3-13