Toshiba B-852 Printer User Manual


 
2. PRINTER SETUP ENGLISH VERSION EO1-33055
2.9 Setting an Operating Environment
E2-22
2.9.1 Parameter Setting
(Cont.)
(12) KANJI Code Selection
This parameter is to choose a KANJI code.
When “<2>PARAMETER SET” appears, press the [PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting a Kanji code, press the [PAUSE] key.
(13) EURO Code Selection
This parameter is to choose a Euro code (€).
When “<2>PARAMETER SET” appears, press the [PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting a Euro code, press the [PAUSE] key.
NOTE:
K
anji code selection is not supported
by the QQ/QP model as the Kanji
R
OMs are not installed.
EURO CODE B0
NOTE:
P
ressing the [FEED] or
[RESTART
]
key causes 1 byte
change in the Euro Code value.
[RESTART]
[FEED]
EURO CODE 20
EURO CODE 21
EURO CODE FE
EURO CODE FF
KANJI CODE TYPE1
KANJI CODE TYPE1
KANJI CODE TYPE2
[RESTART]
[FEED]
Windows code
Original code