Filter
Top Products
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33055
7.1 Media
E7- 1
7. SUPPLY SPECIFICATIONS
7.1 Media
Please make sure that the media that will be used is approved by TOSHIBA TEC. The warranty does not apply
when a problem is caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorised service
representative.
7.1.1 Media Type
Two types of media can be loaded for this thermal transfer and direct thermal printer label or tag. The table
below shows size and shape of the media available for this printer.
[Unit: mm]
Label dispensing mode
Item
Batch mode Cut mode
Label: 38.0
c Minimum media pitch 15.0
Tag: 25.4
d Label length Min. 12.5 Min. 32.0
e Width including backing paper 100.0- 242.0 100.0 – 235.0
f Gap length 2.5 – 20.0 6.0 – 20.0
g Black mark length (Tag paper) 2.0 – 10.0
h Effective print width 216.8±0.2
i Print speed up/slow down area 1.0
j Black mark length (Label) 2.0 – 20.0 6.0 – 20.0
Max. print length 640.0
Maximum effective length for on the fly issue 320.0
Max. outer roll diameter φ230
Label + backing paper 0.13 – 0.18
Thickness
Tag 0.08 – 0.18
Label
c
d
f
e
h
i
j
Tag paper
c
e
g
h
i
Cut position
Cut position
Stop
position
Stop
position
Feed Direction
Black Mark
(on reverse side)
Black Mark
(on reverse side) Refer to
NOTE 3 below.