Filter
Top Products
Paper Selection 53
Paper Selection
You can select the size of copy paper in two ways; one is automatic paper selection in which the
equipment automatically selects copy paper of the same size as the original, and the other is
manual paper selection in which you can select the desired paper size manually.
Automatic paper selection (APS):
The equipment detects the size of the original placed and automatically selects copy paper of
the same size as the original. This function is enabled only when standard size originals (LD, LG,
LT, LT-R, COMP, ST-R) are used and also the Automatic Document Feeder (optional) is used.
Manual paper selection:
You can select the desired size of copy paper manually. This function can be used in a case the
APS cannot be used, such as when originals are non-standard sizes or overhead transparen-
cies, or when an original is placed on the original glass.
Automatic paper selection (APS) can be used only when you place originals on the Automatic
Document Feeder (optional).
Automatic paper selection (APS)
When you place a standard size original on the Automatic Document Feeder (optional), the
equipment detects its size and automatically selects copy paper of the same size as the original.
The standard sizes the equipment can detect are as follows: LD, LG, LT, LT-R, COMP, ST-R
The equipment may not be able to correctly detect the size of the originals listed below. Use
manual paper selection for the following originals:
y Highly transparent ones (e.g. overhead transparencies, tracing paper)
y Wholly dark ones or ones with dark borders
y Non-standard size ones (e.g. newspapers, magazines)
P.54 “Manual paper selection”
1
Place paper in the drawer.
Register the size of the paper into the equipment in advance.
P.36 “Preparation 3 - Registering Size of Paper Placed”
2
Place the original on the Automatic Document Feeder.