Filter
Top Products
5 TROUBLESHOOTING
72 When Message Lamp is Lit/Blinking
When Message Lamp is Lit/Blinking
Message lamps on the control panel are lit or blink depending on the status of the equipment.
Each lamp shows the following status:
1. Cover open lamp
This blinks when any cover of the equipment, such as the front cover, the side cover or the
upper cover of the Automatic Document Feeder (optional), is not securely closed. Close it
securely.
2. Paper empty lamp
This blinks when the paper in a drawer or on the bypass tray has run out. Add paper. For
how to place paper, see the following pages for the details:
P.32 “Placing paper in drawers”
P.48 “Using Bypass Tray”
3. Toner lamp
This shows you the current status of the remaining toner (only when a TOSHIBA-recom-
mended toner cartridge is used).
Lit: There is only a little toner left in the toner cartridge. (You do not have to replace the
cartridge.)
Blinking: The toner in the toner cartridge has run out. (Replace the cartridge.)
y It occasionally happens that the toner lamp may not light because the toner remaining in
the cartridge does not lie evenly.
y When the toner lamp starts being lit, it is advisable to purchase a new TOSHIBA-recom-
mended cartridge to prepare for its replacement.
y When a toner cartridge other than the one we recommend is used, remaining toner can-
not be checked. The toner lamp is lit or it blinks.
1
2
3
4
5