Filter
Top Products
User’s Manual EN-21
Installation
Connecting the dynadock™ to the Computer
It is recommended to connect the dynadock to your PC according to the
instructions during the audio driver installation. Please follow the steps to
connect it correctly:
1. Plug the AC adaptor into the DC-IN on the back of the dynadock.
(Sample Illustration) Connecting the power to the dynadock
2. Connect the AC adaptor with the power cord/cable, and then connect
the power cord/cable to a live electrical outlet. The power indicator on
the front panel glows blue when the dynadock is powered on.
3. Plug the square end of the USB cable into the USB upstream connector
on the back of the dynadock.
(Sample Illustration) Connecting the USB cable to the dynadock