Filter
Top Products
13
1
LOADING PAPER
The paper required indicator ( ) will light up when there is no copy paper in the selected paper feed tray, or when
the selected paper tray is not installed or is improperly installed.
PAPER
For best results, use only TOSHIBA recommended paper.
*
1
A5 (ST) can be used in the upper paper tray but cannot be used in the second tray.
*
2
When making a large number of copies or prints using 90 g/m
2
(24 lbs.) paper, remove the output from the paper
output tray when about 100 pages have been printed. The output may not stack correctly if more than 100 pages
are allowed to accumulate.
*
3
The number of sheets of the paper which can be set changes with the weight of a paper.
Special papers
Follow these guidelines when using special papers.
● Use TOSHIBA recommended transparency film and label sheets. Using other than TOSHIBA
recommended paper may result in misfeeds or smudges on the output. If other than TOSHIBA
recommended media must be used, feed each sheet one at a time using the bypass tray (do not attempt
continuous copying or printing).
● There are many varieties of special paper available on the market, and some cannot be used with this
machine. Before using special paper, contact your authorized service representative.
● Before using other than TOSHIBA recommended paper, make a test copy to see if the paper is suitable.
Paper tray type Paper type Size Weight Capacity
Paper tray Standard paper
Recycled paper
A5*
1
A4
B4
A3
ST*
1
LT
8-1/2" x 13"
LD
56 g/m
2
to 90 g/m
2
*
2
(15 lbs. to 24 lbs. *
2
)
250 sheets
(Load paper lower than
the line on the tray)
Bypass tray Standard paper
Recycled paper
A6R to A3
(ST to LD)
56 g/m
2
to 80 g/m
2
(15 lbs. to 20 lbs.)
100 sheets *
3
Thick paper Max. 200 g/m
2
(54 lbs.) Load one sheet of
these papers at a time
to the bypass tray.
Transparency film
Labels
Envelopes International DL
(110 mm x 220 mm)
International C5
(162 mm x 229 mm)
Commercial 9
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
5 sheets