Filter
Top Products
TROUBLESHOOTING
49
5
MISFEED IN THE MACHINE
1
Open the bypass tray and the side
cover.
2
Check the misfeed location. Remove
the misfed paper following the
instructions for each location in the
illustration below.
A. Misfeed in the paper feed area
1
Gently pull on the top center of the
front cover to open.
2
Carefully remove the misfed paper.
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
Be careful not to tear the
misfed paper during
removal.
3
Close the front cover and side cover.
The misfeed indicator
( ) will go out.
If paper is misfed here, go to "B.
Misfeed in the fusing area".
If the misfed paper is visible here,
go to "C. Misfeed in the transport
area".
If paper is misfed here, go to "A.
Misfeed in the paper feed area".
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
Roller rotating knob
• When closing the front cover, gently hold
both ends.
• When closing the side cover, press on the
handle.
• If the misfeed indicator ( ) does not
stop blinking, check for torn pieces of
paper in the machine.
Note