Filter
Top Products
Managing Address Book 69
3) Network - Enable TCP/IP Search
Check on this to search devices that connect to the TCP/IP network. This is available only
when the TCP/IP protocol is installed in your computer.
When this is enabled, select how it searches printers in the TCP/IP network.
- Search local subnet
— Select this to search devices in local subnet.
- Specify a range — Select this to specify a range of IP addresses to search devices. In
this case check “IPv4” and enter the desired range of IP addresses in the “From” and “To”
fields. “IPv6” is unavailable.
This equipment does not support [SNMP Settings].
— Configuring the connection by manual selection
You can configure the connection by entering the IP or IPX address of the device manually.
Configuring the connection manually and obtaining the address book data
1
Select “Public Address Book” in the browse pane, click the [Tools]
menu, and select [Device Setting].
The Local Discovery dialog box appears.