Filter
Top Products
Replacement Procedures
ODD bracket 3
Screws
Figure 4-15 Disassemble the side bracket
Install an optical disk drive
The following describes the procedure of installing an optical disk drive (See Figure 4-12 and
4-13).
1. Attach the ODD bracket to an optical disk drive and secure it with the following screws.
• M2.0×3.0 Flat BIND screw x 3
2. Insert an optical disk drive assembly into the slot and connect it to the connector CN26
on the system board.
3. Secure the ODD drive with the following screw.
• M2.5X4.0 Flat BIND screw x 1
4. Secure the Memory Module Cover with the following screw.
• M2.5×4.0B BIND screw x 3
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
4-29