Filter
Top Products
Replacement Procedures
NOTE: Apply the silicon grease enough to cover the chip surface using the special
applicator. Thermal pad is fixed for each one, no need special applicator.
Figure 4-29 Apply silicon grease
6. Install the CPU heat sink and heat sink holder and secure them with the following
screws along 1 to 6.
• M2.0 X 3 Special Spring screw x3
7. Connect the Heat sink cable to the connector on the system board
NOTE: When securing the heat sink holder, be sure to secure the screws in the order of
the number marked on the holder.
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
48