Filter
Top Products
4.13 FL Inverter Board 4 Replacement Procedures
Figure 4-34 disconnecting the cables
Installing the FL Inverter Board
Install the FL inverter board according to the following procedures and Figures 4-33 and 4-
34.
1. Connect the LCD/FL cable to LCD/FL connecter, and connect the HV cable to HV
connecter.
2. Place the LCD module, FL inverter board in the correct position.
3. Fasten the three M2.5x4.5 white flat-head screws to secure the FL inverter board and
LCD module.
EQUIUM M40/M45 / Satellite M40/M45 Maintenance Manual 4-47