Filter
Top Products
Toshiba Corporation Digital Media Network Company
Page 56 of 153
© 2003, Copyright TOSHIBA Corporation All Rights Reserved
11.7.10 Command Register
- CS0 DA2-DA0 : 7 Write only
The command register accepts commands for the drive to perform fixed disk operations. Commands are
executed when the TASK FILE is loaded and the command register is written and only when:
The status is not busy (BSY is inactive).
and
DRDY (drive ready) is active.
Any code NOT defined in the following list causes an Aborted Command error. Interrupt request (INTRQ)
is reset when a command is written. The following are acceptable commands to the command register.