Filter
Top Products
OPERATING BASICS
4-19
Using the internal modem
Using the internal modem
This section describes how to make settings and connect the modem. Refer to the
computer’s online help files for more information. Refer also to the online help files
for your modem software.
NOTE: The internal modem does not support the voice functions
described in the help files. All data and fax functions are supported.
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable
from the telephone jack.
2. Do not connect the modem to a digital telephone line.
A digital line will damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you will need to
make sure the internal modem’s settings are correct for the region in which it will be
used.
1. a. In Windows XP, click start, point to All Programs, point to TOSHIBA
Internal Modem and click Region Select Utility.
NOTE: Do not use the Country/Region Select function in the Modem
setup utility in the Control Panel if the function is available. If you
change the Country/Region in the Control Panel, the change may not
take effect.
b. In Windows 2000, click Start, point to Programs, point to TOSHIBA
Internal Modem and click Region Select Utility.
2. The Region Selection icon will appear in the Windows Task Bar.
Figure 4-16 The Region Selection icon (Windows XP)