Filter
Top Products
8-16
User’s Manual
OPTIONAL DEVICES
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the internal
display. Refer to Chapter 5, The Keyboard, for details on using hotkeys to change
the display setting.
NOTE: If you set Simultaneous for the computer’s display, you must
set the computer’s display resolution to the same as that of the external
monitor or other device, such as a projector.
Television
A television can be connected to the video out port on the computer. To connect a
television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video out
port.
Figure 8-14 Connecting a television
3. Turn the television on.
4. Turn the computer on.
PS/2 mouse
Use the PS/2 keyboard/mouse port on the computer or optional Advanced Port
Replicator to connect a PS/2 mouse.
Make sure the mouse has a cable with a 6-pin connector for the PS/2 mouse port. If
the mouse’s cable is not compatible, see your dealer for an adaptor cable.