6-6
User's Manual
POWER AND
POWER-UP MODES
To ensure that the battery pack maintains its maximum capacity, operate the
computer on battery power at least once a month until the battery pack is fully
discharged. Refer to Extending battery life in this chapter for procedures. If the
computer is continuously operated on AC power, either through an AC adaptor or a
docking station for an extended period, more than a month, the battery may fail to
retain a charge. It may not function efficiently over the expected life of the battery
and the Battery LED may not indicate a low-battery condition.
Secondary battery (option)
An optional secondary battery can be installed in the Slim Select Bay to increase
your battery operating time. Note the caution on Resume mode in the previous
section Main battery.
CAUTION: The secondary battery pack is a lithium ion battery, which
can explode if not properly replaced, used, handled or disposed of.
Dispose of the battery as required by local ordinances or regulations.
Use only batteries recommended by TOSHIBA as replacements.
Real time clock battery
The Real Time Clock (RTC) battery provides power for the internal real time clock
and calendar. It also maintains the system configuration.
If the RTC battery becomes completely discharged, the system loses this data and
the real time clock and calendar stop working. The following message appears when
you turn on the power:
*** Bad RTC battery ***
Check system. Then press [F1] key . . . . . .
CAUTION: The computer’s RTC battery is a lithium ion battery and
should be replaced only by your dealer or by a TOSHIBA service
representative. The battery can explode if not properly replaced, used,
handled or disposed of. Dispose of the battery as required by local
ordinances or regulations.
Care and use of the battery pack
The battery pack is a vital component of portable computing. Taking proper care of
it will help ensure longer operating time on battery power as well as a longer life for
your battery pack. Follow the instructions in this section carefully to ensure safe
operation and maximum performance.