Filter
Top Products
8-9
OPTIONAL DEVICES
Additional battery pack (Black)
3. Remove two screws securing the memory module cover.
4. Lift off the cover.
5. Use a slender object such as a pen to press two latches on either side of the
memory module to the outside. The memory module will pop up.
6. Grasp the memory module by the sides and pull it out.
CAUTION: Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access problems.
Figure 8-8 Removing the memory module
7. Seat the cover and secure it with two screws.
Additional battery pack (Black)
You can increase the portability of the computer with additional battery packs
(PA3191*). If you’re away from an AC power source, you can replace a low battery
with a fully charged one. See Chapter 6, Power and Power-Up Modes.
SLOT A
SLOT B
LATCHES