Filter
Top Products
6-14
User's Manual
POWER AND
POWER-UP MODES
Figure 6-2 Securing the battery cover
Starting the computer by password
To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 3, Getting Started. The following
message appears:
Password =
NOTE: At this point, the hot keys Fn + F1 to F5 do not work. They will
function after you enter the password.
2. Enter the password.
3. Press Enter.
NOTE: If you enter the password incorrectly three times in a row, the
computer shuts off. In this case, you must turn the computer back on to
retry password entry.
BATTERY PACK
BATTERY
RELEASE
LATCH