Filter
Top Products
9-19
T
ROUBLESHOOTING
Hardware and system checklist
USB
Refer also to your USB device’s documentation.
Problem Procedure
USB device does Check for a firm cable connection between the
not work USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows XP documenta-
tion for information on checking the drivers.
If problems persist, contact your dealer.
Memory expansion
Refer also to Chapter 8, Optional Devices, for information on installing memory
modules.
Problem Procedure
The following message Make sure the memory module installed in the
is displayed on the expansion slot is compatible with the computer.
Sub LCD: If an incompatible module has been installed,
MEM0 ERROR follow the steps below.
or 1. Disconnect the universal AC adaptor and all
MEM1 ERROR peripheral devices
2. Remove the battery.
3. Remove the memory module.
4. Replace the battery and/or connect the
universal AC adaptor.
5. Turn on the power.
If problems persist, contact your dealer.