T
HE
G
RAND
T
OUR
2-13
Slim Select Bay modules
Disk-In-Use This indicator lights when the diskette is being accessed.
Indicator
Diskette slot Insert diskettes in this slot.
Eject button When a diskette is fully seated in the drive, the eject
button pops out. To remove a diskette, push in the eject
button and the diskette pops out partially for removal.
CAUTION: Check the Disk-In-Use indicator when you use the diskette
drive. Do not press the eject button or turn off the computer while the light is
glowing. Doing so could destroy data and damage the diskette or the drive.
NOTES: 1. The external diskette drive should be placed on a flat,
horizontal surface when in use. Do not set the drive on an
incline greater than 20
o
while it is operating.
2. Do not set anything on top of the diskette drive.
Slim Select Bay modules
The Slim Select Bay can accommodate the following modules: DVD-ROM drive, CD-
RW/DVD-ROM drive, DVD-R/-RW drive, DVD Multi drive, optional Slim Select
Bay HDD adaptor or TOSHIBA Style Bay Bridge media adaptor.
DVD-ROM drive
Refer to the DVD-ROM drive item in the Fixed optical media drive section for
details.
Figure 2-11 The DVD-ROM drive
CD/DVD-IN-USE
INDICATOR
EJECT BUTTON
EJECT HOLE