User's Manual
7-4
HW SETUP AND
PASSWORDS
Built-in HDD
−>−>
−>−>
−> PC Card
−>−>
−>−>
−> 2nd HDD
HDDs are searched for a boot command in the following
order: the built-in HDD, the PC card and the HDD installed
in the Slim Select Bay.
2nd HDD
−> −>
−> −>
−> PC Card
−> −>
−> −>
−> Built-in HDD
HDDs are searched for a boot command in the following
order: the HDD installed in the Slim Select Bay, the PC card
and the built-in HDD.
PC Card
−> −>
−> −>
−> Built-in HDD
−> −>
−> −>
−> 2nd HDD
HDDs are searched for a boot command in the following
order: the PC card, the built-in HDD and the HDD installed
in the Slim Select Bay.
PC Card
−> −>
−> −>
−> 2nd HDD
−> −>
−> −>
−> Built-in HDD
HDDs are searched for a boot command in the following
order: the PC card, the HDD installed in the Slim Select Bay
and the built-in HDD.
NOTE: If a boot command is not found on the first detected HDD, the
system will not boot from the other HDD. It will search the next device in
the boot priority for a boot command.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
[PXE] Sets PXE as the protocol. (Default)
[RPL] Sets RPL as the protocol.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you can turn on
the computer by pressing any key. It is effective only for the internal keyboard and
only when the computer is in standby mode.
Enabled Enables the Wake-up on Keyboard.
Disabled Disables the Wake-up on Keyboard. (Default)