Filter
Top Products
102
6 F 3 B 0 3 6 2
• The Ethernet Port uses a priority ordering in processing sockets 1 through 8. Therefore,
systems constructed so that socket 1 is activated frequently may not be able to process socket 8,
resulting in the following error response:
Status: Send completion timeout (TermSTS = 06H)
When constructing a system, take the socket utilization conditions into account when allocating
sockets. Since the send/receive processing for each socket requires about 50 ms, applications
that issue send or receive requests to a given socket should leave an interval of at least 50 ms
times the number of sockets used between each request.
(Interval between requests to the same socket) ≥ (Number of sockets used × 50 ms)
Similarly, the above intervals averaging 50 ms should be left between transmissions from
remote ports to the local port.
(Interval between remote port transmissions) ≥ (Number of remote ports × 50 ms)