Toshiba T2N Network Card User Manual


 
66
6 F 3 B 0 3 6 2
|/* Register write */ |
|R0092 |
4|-| |-+[12544 MOV W0903][00033 MOV W0904]----------------------------|
| | /* Designates the module and sets the CMD number. */
| | |
| +[RW092 MOV W0905]--------------------------------------------|
| | /* Sets the transfer register data length. */
| | |
| +[RW093 MOV W0906][RW094 MOV W0907]----------------------------|
| | /* Sets the transmission source register type, start number. */
| | |
| +[RW095 MOV W0908][RW096 MOV W0909]----------------------------|
| | /* Sets the transfer destination register type, start number. */
| | |
| +[00100 MOV W0910]---------------------------------------------|
| | /* Sets the response time limit (10 seconds). */
| | |
| +[W0991W0990 DMOV W0912W0911][W0992 MOV W0913]----------------|
| | /* Remote destination IP address, message transmission UDP port
|number */
| | |
| +[W0903 SEND W0914][SET R0093][RST R0092]----------------------|
| /* Sets the request, and starts post-completion readout. */
| |
|/* Register readout */ |
|R0093 |
5|-| |-+[12544 MOV W0920][00033 MOV W0921]----------------------------|
| | /* Designates the module and sets the CMD number. */
| | |
| +[RW092 MOV W0922]---------------------------------------------|
| | /* Sets the transfer register data length. */
| | |
| +[RW097 MOV W0923][RW098 MOV W0924]----------------------------|
| | /* Sets the storage register type, start number. */
| | |
| +[RW095 MOV W0925][RW096 MOV W0926]----------------------------|
| | /* Sets the transfer destination register type, start number. */
| | |
| +[00100 MOV W0927]---------------------------------------------|
| | /* Sets the response time limit (10 seconds). */
| | |
| +[W0991W0990 DMOV W0929W0928][W0992 MOV W0930]----------------|
| | /* Remote destination IP address, message transmission UDP port
|number */
| | |
| +[W0920 RECV W0931][SET R0094][RST R0093]----------------------|
| /* Sets the request, and starts post-completion comparison. */