Filter
Top Products
28
6 F 3 B 0 3 6 2
3.2 Network Wiring Equipment
This section describes the wiring and related equipment that makes up the network to which the
Ethernet Port is connected. Since the Ethernet Port conforms to the ISO 8802-3 (IEEE 802.3)
standard, users should select equipment to be used in the network that also conforms to this
standard.
The following section introduces recommended wiring and related equipment. We strongly
recommend that these models be used when new items are needed.
Contact the manufacturer directly for detailed information on this equipment.
(1) 10BASE-T
• Twisted pair cable
• HUB
Catalog no. ECM-04-¨¨¨M
¨¨¨:Length(1 to 100)
Manufacturer Showa Electric Wire & Cable Co., Ltd.
(Enable cross cable)
Catalog no. ETH-807B ( 8 ports)
ETH-707A (16 ports)
Manufacturer Showa Electric Wire & Cable Co., Ltd.
(Enable cross cable)