Filter
Top Products
170
6 F 3 B 0 3 6 2
CAUTION
1. Always turn off the power before attaching or removing modules, the terminal block, or cables.
Electrical shock, malfunctions, and breakdowns are possible if these operations are performed with
the power on.
2. To keep the system operating normally at all times and to prevent trouble in advance, perform daily
inspections, periodic inspections, and cleaning.
3. Refer to the section on error recovery in this document if the Ethernet Port does not operate
correctly.
Contact your local Toshiba dealer or service representative if a breakdown occurs, and request that
the module be repaired or returned to Toshiba.
Operation and safety cannot be guaranteed if service is performed by anyone other than an
authorized Toshiba service representative.
4. Do not disassemble or modify the module hardware, and do not modify the module software.
Breakdowns or malfunctions may lead to fire, electrical shock, or injury.
5. When measuring the voltages at the module terminal block during inspections, use adequate
caution.
There is a danger of electrical shock during this operation.
6. Only exchange modules with the power completely off.
Exchanging modules with the power on can lead to malfunctions, breakdowns, and electrical shock.
7. Do not continue to use the module if it emits smoke or unusual odors, or if it is in an abnormal state
of any type.
Using the module in an abnormal state can lead to malfunctions, breakdowns, and electrical shock.
In such cases, immediately turn of all power and contact your local Toshiba dealer or service
representative.
Customers should never attempt repairs or modifications to this equipment themselves: repair and
modification operations are extremely dangerous.