Filter
Top Products
142
6 F 3 B 0 3 6 2
The EACC LED indicates when the T2N is accessing the Ethernet Port.
Table 8.3 States Indicated by the EACC LED
LED display State
EACC (Access) Indicates whether or not the T2N is accessing the Ethernet Port.
• Lit ........The T2N is accessing the Ethernet Port.
• Off....... The T2N is not accessing the Ethernet Port.
• Lights after Ethernet Port initialization completes when power is first applied. (Access starts.)
If this LED does not light after power is turned on:
Verify that the T2N is correctly connected to the base unit.
If this LED does not light at above, then the T2N itself is defective. Replace the T2N.
Supplement:
We recommend keeping spares on hand to minimize the time required to determine the
location of the fault using and to minimize the time required for recovery.