Filter
Top Products
7-2 User’s Manual
HW Setup and Passwords
General
This window displays the BIOS version and contains two buttons: Default
and About.
Setup
This field displays BIOS Version and date.
Password
User Password
This option allows you to set or reset the user password for power on.
To enter a user password:
1. Select Registered to display the following prompt:
S Enter Password:
2. Enter a password of up to 10 characters. (You cannot use the following
characters: - ^ @ [ ] ; : , . / space.) The character string you enter is
displayed as a string of asterisks. For example, if you enter a password
consisting of four characters, the display is shown as:
S Enter Password: ****
3. Click the OK button. The following message appears, allowing you to
verify the password.
S Verify Password:
4. If character strings match, the password is registered and the display
changes to:
S The password was registered
If they do not match, the following message appears. You must repeat
from step 1.
S Entry Error!!!
Default Return all HW Setup values to the factory
settings.
About Display the HW Setup version.
Not Registered Change or remove the password. (Default)
Registered Set the password. A dialogue box will appear to
let you set the password.
If you click the OK button before entering the password, Not
registered will appear on the display.