Filter
Top Products
102
8. To set the outgoing frames are VLAN-Tagged frames or untagged. Then click
Apply
.
Tag: outgoing frames with VLAN-Tagged.
Untag: outgoing frames without VLAN-Tagged.
Port VID:
Configure port VID settings
1.
Port VLAN ID:
enter the port VLAN ID.
2.
Ingress Filtering:
Ingress filtering lets frames belonging to a specific VLAN to be
forwarded if the port belongs to that VLAN.
Enable
: Forward only packets with VID matching this port's configured VID.
Disable
: Disable Ingress filter function
3.
Acceptable Frame type:
Tag Only:
Only packet with match VLAN ID can be permission to go through
the port.
ALL:
Acceptable all Packet
4.
VLAN ID Range:
select a range of VLAN ID. There are 16 VLAN ID range. The
ports are assigned to the same VLAN ID will be in the same VLAN group.
5. Click
Apply
.
6. To reset back to default value, click
Default
button.
Formatted: Bullets and Numbering