Filter
Top Products
64
802.1x Setup interface
System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this
function.
1. Select
<Edit>
2.
Radius Server IP:
set the Radius Server IP address.
3.
Shared Key:
set an encryption key for using during authentication sessions with
the specified radius server. This key must match the encryption key used on the
Radius Server.
4.
NAS, Identifier:
set the identifier for the radius client.
5.
Server Port:
set the UDP destination port for authentication requests to the
specified Radius Server.
6.
Accounting Port:
set the UDP destination port for accounting requests to the
specified Radius Server.
7. Select
<Save>