Tripp Lite B006-VUA4-K-R Switch User Manual


  Open as PDF
of 28
 
17
OSD Main Page Functionality
As with Hotkeys or Push-buttons, the OSD Main Page allows you to individually switch
functionality to a desired port, or switch all functionality simultaneously. This can be done
using your keyboard or mouse. You can also use the OSD Main page to activate Auto Scan
mode,accesstheOSDSettingsPageandlogoutoftheKVMswitch.
Switch KVM, USB and Audio Focus Simultaneously via Keyboard
1. When in the OSD Main Menu, press the [F7] key. Three highlight bars will appear, one in
each functionality column.
2. Use the [↑] and [↓] keys to move the three highlight bars to the row of the desired port.
3. When the three highlight bars are in the row of the desired port, hit the [Enter] key. The
OSD will disappear and the selected port will be accessed.
Switch KVM, USB and Audio Focus Simultaneously via Mouse
1. When in the OSD Main Menu, click on the [F7] textatthebottomofthescreen,or,click
on the desired port number in the PN column. Three highlight bars will appear, one in
each functionality column. If you used the mouse to click on the desired port number,
skip to Step 3.
2. Click on the UP or DOWN icons at the bottom of the screen to move the three highlight
bars to the row of the desired port.
3. When the three highlight bars are in the row of the desired port, hit the [Enter] key,
double-click on the port number or double-click on one of the three highlight bars. The
OSD will disappear and the selected port will be displayed.
Individually Switch KVM, USB and Audio Focus via Keyboard
1. When in the OSD Main menu, press the [F1] key to bring up the highlight bar in the
KVM column, [F2] to bring up the highlight bar in the USB column, or [F3] to bring up
the highlight bar in the Audio column. You can also use the [Tab] key to toggle between
the three columns.
2. When the highlight bar is in the desired column, use the [↑] and [↓] keys to move the
highlight bar to the row of the desired port.
3. When the highlight bar is in the row of the desired port, press the [Enter] key. The OSD
disappearsandtheportselectedtohavetheKVMfocuswillbedisplayed.
Note: You can set each functionalities focus at the same time by moving each highlight bar
to the desired row before pressing the [Enter] key.
201004198 93-2947.indd 17 4/23/2010 3:26:54 PM
 previous next