Tripp Lite B006-VUA4-K-R Switch User Manual


  Open as PDF
of 28
 
18
OSD Main Page Functionality continued
Individually Switch KVM, USB and Audio Focus via Mouse
1. When in the OSD Main menu, click on the [F1]texttobringupthehighlightbarinthe
KVM column, [F2] to bring up the highlight bar in the USB column, or [F3] to bring
up the highlight bar in the Audio column. You can also click on the area of the desired
columnnexttothedesiredrowtobringthehighlightbardirectlytothedesiredspot.If
youchoosetoclickdirectlyonthedesiredport/column,skiptoStep3.
2. Once the highlight bar is in the desired column, Click on the UP or DOWN icons at the
bottom of the screen to move it to the row of the desired port.
3. When the highlight bar is in the row of the desired port, hit the [Enter] key, or double-
click on the highlight bar. The OSD will disappear and the selected port will be displayed.
Note: You can set each functionalities focus at the same time by moving each highlight bar to
the desired row before pressing the [Enter] key or double-clicking on one of the highlight bars.
Naming Ports
1. Press the [Tab] key until a highlight bar shows up in the Name column. You can also click
inside the Namecolumnnexttothedesiredporttobringthehighlightbarexactlywhere
youwantit.Ifyouchoosetoclickdirectlyonthedesiredport/column,skiptoStep3.
2. Once the highlight bar is in the Name column, use the [↑] and [↓] keys or click on the UP
or DOWN icons at the bottom of the screen to move it to the row of the desired port.
3.Oncethehighlightbarisnexttothedesiredport,pressthe [Enter] key or double-click on
it.Apinkboxwillappearinthehighlightbar,signifyingitisreadytobeedited.
4.Typethedesirednameinthehighlightbar.Amaximumof15charactersisallowed.
5. When you have typed in the desired port name, press the [Enter] key or click on the
highlight bar to save it.
Exiting the OSD Main Screen
ToexittheOSDMainScreenandgobacktothelastportselectedtohavetheKVM focus,
press the [Esc] key or right-click the mouse.
Note: A functionalities focus will not be switched to another port if you simply highlight it
and then exit the OSD. You must press the [Enter] key or double-click on the highlight bar to
switch focus to that port.
F4: Scan
Pressing the [F4] key or clicking on the [F4]textatthebottomoftheOSDMainPagewill
initiate an Auto Scan.Whenstarted,theKVMwillscanbetweencomputersthatareboth
connected and powered-on. The interval that each port is scanned for is set in the Scan Du-
rationeldoftheOSDSettingsMenu.(Seepage20fordetails.)ToexitAuto Scan mode,
press the [Esc] key or [Spacebar] key.
F6: Set
Pressing the [F6] key or clicking on the [F6] textatthebottomoftheOSDMainPagewill
bringyoutotheOSDSettingsPage.TheOSDSettingsPageandit’sfeaturesarediscussed
in detail in the following section.
201004198 93-2947.indd 18 4/23/2010 3:26:54 PM
 previous next