Filter
Top Products
6
Initial Network Configuration
1. Quick Start Guide
Warning: If the DHCP connection fails on boot up, the B050-000 will not have an IP address.
B050-000 Setup Tool
The setup tool is used to determine the IP address assigned to the B050-000 by the DHCP server or to change the device's
initial network configuration.
Main Window
Figure 1-4. B050-000 Setup Tool (Windows Version)
If this initial configuration does not meet your local requirements, adjust the values as needed. You may either configure
the B050-000 via serial interface or use the setup tool that can be found on the CD-ROM delivered with this package.
The B050-000 network interface is configured with the parameters shown in Table 1-1.
Parameter Value
IP auto configuration DHCP
IP address —
Netmask 255.255.255.0
Gateway none
IP access control none
Table 1-1. Initial Network Configuration