Filter
Top Products
72
Enable SSH access:
Set this option to allow accessing the B050-000 using the Secure Shell (SSH) protocol. The SSH console offers
the same features as Telnet (see the Section called Telnet Console), but uses a secure, encrypted connection instead.
Disable Setup Protocol:
Enable this option to exclude the B050-000 from the setup protocol.
LAN Interface Settings
This entry field displays the current settings for the Ethernet/LAN interface of the B050-000. You may choose between
auto negotiation and a fixed setting for the Ethernet transceiver settings “interface speed” and “duplex mode” in case auto
negotiation does not work correctly.
LAN interface speed:
Depending on your network connection you may select a speed value for this interface. To adjust the interface
automatically, choose “autodetect” (default value). If this selection results in misbehavior of the interface, choose
one of other speed options to be used. The interface will transmit and receive data with that fixed speed.
LAN interface duplex mode:
If necessary, you may also select a specific duplex mode. The default value is set to “autodetect” which leads to
an automatic setting of the duplex mode depending on your network (recommended). As an alternative you may
explicitly set the interface to either “half duplex” or “full duplex” mode.
These settings may also be configured via a serial console. See the Section called Initial Configuration via Serial Console
in Chapter 4 for details.
6. Menu Options