Filter
Top Products
8
1. Quick Start Guide
Using the Linux Tool:
The MAC address of the B050-000 is displayed on the upper left corner of the screen. To detect the MAC address manually,
press the “Refresh” button. The displayed MAC address is the same MAC address printed on the white sticker placed on the back
of the B050-000. The Linux setup tool currently does not support device configuration via the USB interface. Please use either
a network connection or the serial console for the initial device configuration. Furthermore, there are two buttons on the window:
“Query Device” and “Setup Device”. Press the “Query Device” button to display the reconfigured values of the network
configuration. The values are displayed in the text fields located nearby. If necessary, adjust the network settings to your needs.
To save the changes enter a user name and password, then press the “Setup Device” button.
Authentication
To adjust the authentication settings, enter your login as a Super User and change your password.
Super User Login:
• Enter the login name of the super user. The initial value is “super”.
Super User Password:
• Enter the current password for the super user. The initial value is “pass”.
New Super User Password:
• Enter the new password for the Super User.
New Password (Confirm):
• Re-type the new password for the Super User. To close the window and accept the changes press the “OK”
button, otherwise press the “Cancel” button (on Windows). On a Linux system, close the window
by the appropriate button on the window frame.
To configure the B050-000 via serial interface, both a serial port replicator cable and a null modem cable are required
(available separately). Connect the null modem cable to the serial interface with the black connector on the port replicator.
The serial interface needs to be adjusted with the parameters as shown in Table 1-2.
Configuration via Serial Interface
Parameter Value
Bits/second 115200
Data bits 8
Parity no
Stop bits 1
Flow control none
Table 1-2. Serial Parameters