Filter
Top Products
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
50
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
51
Font Name Character size (WxH) Command String Section
24 CPI normal 8x23 ESC+’k’+’5’ 2.1
21 CPI normal 9x23 ESC+’k’+’4’ 2.1
19 CPI normal 10x23 ESC+’k’+’3’ 2.1
16 CPI normal 12x23 ESC+’k’+’2’ 2.1
12 CPI normal 16x23 ESC+’k’+’1’ 2.1
13 CPI rotated 14x16 ESC+’k’+’0’ 2.1
Table QR 2 – Printer Font Commands – Courier Character Set
Printer Font Commands:
Command String Printer Action Section
ESC – ‘F’ – ‘1’ Selects “International” character set A.1.2.
ESC – ‘F’ – ‘2’ Selects “PC Line Draw” character set A.1.2.
ESC – ‘U’ – ‘1’ Enable emphasized print 2.3
ESC – ‘U’ – ‘0’ Disable emphasized print 2.3
Table QR3 - Printer Font Commands
Printer Graphic Commands:
Printer Command String Printer Action Section
ESC – ‘A’ – n Select dot line spacing between printed lines. 2.4
ESC – ‘J’ – n Graphic Line Feed command 2.4
ESC – ‘P’ – ‘#’ Select Online mode, characters printed as received 5.5
ESC – ‘P’ – ‘$’ Select Buffer mode, characters are printed on (^D) 5.5
ESC – ‘V’ – n1 – n2 –
<data>
8-bit Graphic command 3.1
ESC – ‘v’ – n1 – n2 –
<data>
8-bit Compressed Graphic Command 3.2
Table QR4 - Printer Graphic Commands
Graphic Logo and Bar code commands:
Command String Printer Action Section
ESC – ‘L’ – ‘G’ – n Prepare printer to load image A.2.2
ESC – ‘G’ – 0x0FF Loading Logo Complete A.2.2
ESC – ‘L’ – ‘g’ – n Print stored logo image A.2.2
ESC – ‘z’ – n1 – n2 – L – [data] Print Bar Code without visible text 4.0
ESC – ‘Z’ – n1 – n2 – L – [data] Print Bar Code with visible text 4.0
ESC – ‘Q’ – ‘J’ – n Reverse Dot Feed 6.2
ESC – ‘Q’ – ‘Q’ – n Set Out of Paper Sensitivity 6.2
ESC – ‘Q’ – ‘F’ – m Set Forward Black Mark Seek 6.2
ESC – ‘Q’ – ‘B’ – m Reverse Black Mark Seek 6.2
Table QR 5 – Graphic Logo and Bar Code Commands
Printer Supervisory and Control Commands:
Command String Printer Action Section
^V Buffer, power timer & battery status 5.6
^B Buffer status 5.6
ESC – ‘P’ – ‘^’ Print Battery Voltage 5.3
ESC – ‘P’ – alpa Time and date print and control
ESC – ‘M’ – ‘000’ - cr Disable the power down timer 5.4
ESC – ‘M’ – ‘nn0’ - cr Sets the power down timer to nn seconds 5.4
ESC – ‘C’ Reset Auto power down to 20 seconds 5.4
ESC – ‘P’ – ‘( ‘ Firmware version query 5.6
ESC – ‘P’ – ‘)’ Hardware model query 5.6
Table QR6 – Printer Supervisory and Control Commands