Filter
Top Products
7
I. Getting Started (cont’d)
Starting the Device
To start your Cruz, press the on/off button located at the left side of the device. When you first
turn on the Cruz, you will be greeted with a CRUZ logo, then an ANDROID logo, and then
your Home screen.
The display has a screen timeout by default set to 10 min. If the unit is left inactive for that
period of time, the screen will go dark as if turned off. However, it is simply in standby mode.
Tap the power button and a screen will appear with a green padlock button on the lower
lefthand corner. This is your LOCK SCREEN. Drag the padlock to the right to unlock.
The Battery should have a nominal charge on it out of the box and should charge fairly
rapidly. Connect the charger to the DC-IN jack on your Cruz for 3 hours for a full charge
lasting approx. 10 hours. The unit also charges when tethered to PC via USB. Battery life will
vary due to many conditions, especially when using Wi-Fi and maximum screen brightness.
Sleep Mode
To save battery, you should put your Cruz in sleep mode by
turning off the LCD display. To do this, tap (not hold) the power
button. Tap again to bring up the lock screen. In standby mode,
the battery still discharges as the device continues to run. If left
in standby indefinitely, the battery will die and the unit will need
to be recharged before normal use.
Power Down
To turn off your Cruz completely, press and hold the power button until the “Device options”
dialog appears and tap “Power off.” You should then see a dialog box that reads: “Your
device will shut down.” Tap “OK” and your device will proceed to shut down. When powered
down, the device will not discharge the battery.