Filter
Top Products
SCANNING FROM THE BUTTON PANEL ON THE SCREEN 15
CONFIGURING THE SCANNER AND SCREEN BUTTONS
When you first connect your scanner to a computer, the scanner’s
software configures each button with appropriate settings. Using the
Configuration dialog box, you can modify the button settings to meet
your specific needs.
ABOUT THE CONFIGURATION DIALOG BOX
The Configuration dialog box shows the current settings for each
button on the scanner and screen panel.
The tabs across the top of the dialog box correspond to the buttons.
Clicking a tab shows the current settings for the corresponding button
on the scanner.
For example, the following figure shows the current settings for the Scan
button because the Scan tab is selected. The Scan button is set up to
scan the item with the configuration named Scan Magazine, and then
after the scanning is finished, to open PaperPort to display the scanned
image. The Format and Page(s) option is set to scan as a bitmap for a
single page item.
Select a software
application to
send the scanned
image to.
Select a setting
for scanning
the item.
Select format
and page(s)
options for the
button.
Click this
tab to set
preferences.