Filter
Top Products
20 VISIONEER ONETOUCH 8820 SCANNER INSTALLATION GUIDE
7. To scan a 4" by 5" transparency, place the 4" by 5" mask in the
center of the larger mask, and then center the transparency.
You’re now ready to scan the transparency.
To scan the transparency:
1. Start the PaperPort software and click the Twain icon on the
toolbar.
The Visioneer Scan Manager Pro appears.
2. Click the drop-down menu at the top of the Scan Manager Pro and
choose the type of transparency to scan.
Scan Transparency Using:—choose this option to scan 35mm
slide positives or transparency sheets
Scan Negative Using:—choose this option to scan filmstrips or
35mm negatives, or 35mm slide negatives
Tip: You can also start the Visioneer Scan Manager Pro from the
scanner buttons by setting a button to “Configure Before Scanning.”
See “Selecting New Options for the Buttons” on page 26.
Tip: Set the resolution to 1200dpi or better when scanning
transparencies. See the section, “Adjusting the Resolution and
Sharpness” on page 45 for the steps to set the resolution.