Filter
Top Products
18 VISIONEER ONETOUCH 8820 SCANNER INSTALLATION GUIDE
2. Find the appropriate transparency mask for the item you’re
scanning. The masks are in a protective plastic bag with your
scanner.
3. Position the large mask (the one for 5" by 7" transparencies) on the
scanner glass. The mask has one square corner. Align that corner
with the arrow on the scanner body.
You use the large mask when scanning any transparency.
Note that the mask has a strip that matches a narrow band on the
light panel. That narrow band is for calibration. Do not place items
to be scanned in that portion of the mask.
4. To scan a 5" by 7" transparency, center it in the mask on the glass.
Mask for 5" by 7"
transparencies.
Mask for 35mm film
strips and 35mm slides.
Mask for 4" by 5"
transparencies.
Calibration band