Filter
Top Products
SUMMARY OF THE MENU OPTIONS 43
Station
Number
Enter the telephone number of the scanner. The Station Number is
the phone number of the line connected to the built-in modem and
the Station Number should be a value not more than 20 characters.
The “+” (plus) and “ ” (blank space) are supported. The value of the
station number will be printed as part of the fax header information
of all outgoing faxes.
Touch anywhere on the “Station Number” field to bring up the soft
keyboard to type your number.
Select Line Select to use the device’s fax telephone line as a direct outside line
(PSTN line) or as an extension (PABX line).
Choices: *Outside, Extension
PSTN Access
No.
Enter the number to access the PSTN (Pubic Switched Telephone
Network) line if your device’s fax telephone line is used as an
extension.
For example, enter 0 or 9 in the field via the soft keyboard.
Redial Sets the number of redial attempts if the number dialed is busy.
Choices: 0, 1, *2, 3, 4, 5, 6, 7, 8, 9, 10 (The Redial value 0
indicates no redial.)
Redial Interval The redial interval setting selects the number of minutes between
each redial if the number dialed is busy.
Choices: 1, 2, *3, 4, 5, 6 minutes
Ring Response Lets you set the number of times the phone rings before the fax
answers.
Choices: *1 ring, 5, 10, 15, 20 seconds
Sound Volume Use the arrow keys to adjust the sound volume during fax
communication.
Choices: 0, 1, 2, *3
*Factory Default
Options
Add Phone # Choose ON then the new fax number will be automatically included
in the Phone Book after sending the fax finishes.
Choices: ON, *OFF
Fax Settings : Used to specify additional fax settings.
Item Description