Filter
Top Products
STEP 3: INSTALL THE SOFTWARE 7
2. Plug the power cord into the power supply and into a wall outlet.
3. Turn on the power switch, located on the back of the scanner to the
left of the power port.
The status light comes on and flashes indicating that the scanner is
receiving power.
STEP 3: INSTALL THE SOFTWARE
To install the software:
1. Start Microsoft Windows and make sure no other applications are
running.
2. Insert the CD into your computer’s CD-ROM drive.
The CD automatically starts.
Note: You must install the software before connecting the scanner to
your computer. Otherwise, the correct driver software for your
scanner will not be installed and it may not work properly.