Filter
Top Products
10 VISIONEER STROBE XP 450 SCANNER INSTALLATION GUIDE
Your computer recognizes that a scanner has been plugged into the
USB port and automatically loads the appropriate software from
the CD to run the scanner.
2. When the software is finished loading, return to the Connect
Scanner window and click Finish.
The scanner’s status light is green when the scanner and computer
are communicating properly.
3. On the Install Completed window, click Finish.
4. When installation is finished, restart your computer.
5. If you removed the CD from the CD drive and want to install
other software, reinsert the CD into the drive.
In addition to installing the other software from the CD, you can
also view and print the User Guides and Installation Guide.
Note: You can also connect the scanner to a USB port on the
computer’s keyboard if it has one, or to a USB hub. If you use a USB
hub, it must have its own power supply already plugged into an
electrical outlet.
Note: If you have not installed the software, unplug the USB cable
from the computer and install the software now. When the software
installation is complete, a message tells you to connect the scanner.
Note: If you are using Windows XP and have plugged the USB cable
into a USB 1.1 port, an information bubble opens explaining that “A
HI-SPEED USB device is plugged into a non-HI-SPEED USB hub”.
Plug the USB cable into a USB 2.0 port (if available) or disregard the
message. Refer to the Note on page 3 of this guide for more details.