Filter
Top Products
STEP 4: CONNECT THE USB CABLE 9
13. When you see the Connect Scanner window, do NOT click Finish.
Leave the window open and proceed to the next section, “Step 4:
Connect the USB Cable”.
STEP 4: CONNECT THE USB CABLE
The Visioneer Strobe XP 450 scanner connects to any available USB
port. Check your computer’s manual for USB port locations.
1. Plug the USB cable into the USB port on the scanner and then a
USB port on the computer. The ports are identified USB symbols.
Note: You can connect the scanner to your computer while the
computer is running. You do not have to shut down your computer.
USB